DCS WDU models Spécifications télécharger pdf (Page 276)

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

3.5.7.5. E-mail Management AT Commands

3.5.7.5.1. E-mail SMTP Server - #ESMTP

#ESMTP - E-mail SMTP Server

AT#ESMTP=

[<smtp>]

Set command sets the SMTP server address, used for E-mail sending.

SMTP server can be specified as IP address or as nick name.

Parameter:

<smtp> - SMTP server address, string type. This parameter can be either:

- any valid IP address in the format: xxx.xxx.xxx.xxx

- any host name to be solved with a DNS query in the format: <host

name>

(factory default is the empty string “”)

Note: the max length for <smtp> is the output of Test command.

AT#ESMTP? Read Command reports the current SMTP server address, in the format:

#ESMTP: <smtp>

AT#ESMTP=? Test command returns the max length for the parameter <smtp>.

Example AT#ESMTP="smtp.mydomain.com"

Note The SMTP server used shall be inside the APN space (the smtp server

provided by the network operator) or it must allow the Relay, otherwise it

will refuse to send the e-mail.

3.5.7.5.2. E-mail Sender Address - #EADDR

#EADDR - E-mail Sender Address

AT#EADDR=

[<e-add>]

Set command sets the sender address string to be used for sending the e-

mail.

Parameter:

<e-addr> - sender address, string type.

- any string value up to max length reported in the Test command.

(factory default is the empty string “”)

AT#EADDR? Read command reports the current sender address, in the format:

#EADDR: <e-addr>

AT#EADDR=? Test command returns the maximum allowed length of the string

parameter <e-addr>.

Example AT#EADDR="me@email.box.com"

AT#EADDR?

1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 317 318

Pas de commentaire

DCS WDU models Spécifications Page 276