DCS WDU models Spécifications Page 287

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 318
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 286
UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 287 of 318
#CSURVC - Network Survey (Numeric Format)
reported, each of them in the format:
In 2G
(For BCCH-Carrier)
<arfcn>,<bsic>,<rxLev>,<ber>,<mcc>,<mnc>,<lac>,<cellId>,
<cellStatus>,<numArfcn>[,<arfcn1> ..[ <arfcn64>]]
[,<numChannels>[,<ba1> ..[<ba32>]][,<pbcch>[,<nom>,<rac>,<spgc>
<pat> <nco> <t3168> <t3192> <drxmax> <ctrlAck>
<bsCVmax>,<alpha>,<pcMeasCh>]]]
<CR><LF><CR><LF><CR><LF>
where:
<arfcn> - C0 carrier assigned radio channel (BCCH - Broadcast Control
Channel)
<bsic> - base station identification code; if #CSURVF last setting is 0,
<bsic> is a decimal number, else it is a 2-digits octal number.
<bsic> is only applicable for serving cell.
<rxLev> - decimal number; it is the receiption level (in dBm)
<ber> - decimal number; it is the bit error rate (in %). <ber> is not
available in UC864 family. it is always return 0.00.
<mcc> - hexadecimal 3-digits number; it is the mobile country code
<mnc> - hexadecimal 2-digits number; it is the mobile network code
<lac> - location area code; if #CSURVF last setting is 0, <lac> is a decimal
number, else it is a 4-digits hexadecimal number
<cellId> - cell identifier; if #CSURVF last setting is 0, <cellId> is a
decimal number, else it is a 4-digits hexadecimal number. If
<cellId> return 0 that means not available.
<cellStatus> - string type; it is the cell status
..0 - C0 is a suitable cell (CELL_SUITABLE).
1 - the cell is low priority based on the received system information
(CELL_LOW_PRIORITY).
2 - the cell is forbidden (CELL_FORBIDDEN).
3 - the cell is barred based on the received system information
(CELL_BARRED).
4 - the cell <rxLev> is low (CELL_LOW_LEVEL).
5 - none of the above e.g. exclusion timer running, no BCCH
available…etc.. (CELL_OTHER).
(The following informations will be printed only serving cell)
<numArfcn> - decimal number; it is the number of valid channels in the
Cell Channel Description
<arfcn
n
> - decimal number; it is the arfcn of a valid channel in the Cell
Channel Description (
n
is in the range 1..<numArfcn>)
<numChannels> - decimal number; it is the number of valid channels in
Vue de la page 286
1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 317 318

Commentaires sur ces manuels

Pas de commentaire