DCS WDU models Spécifications télécharger pdf (Page 205)

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

#ECAM - Extended Call Monitoring

<onoff>

0 - disables call monitoring function (factory default)

1 - enables call monitoring function; the ME informs about call events,

such as incoming call, connected, hang up etc. using the following

unsolicited indication:

#ECAM: <ccid>,<ccstatus>,<calltype>,,,[<number>,<type>]

where

<ccid> - call ID

<ccstatus> - call status

0 - idle

1 - calling (MO)

2 - connecting (MO)

3 - active

4 - hold

5 - waiting (MT)

6 - alerting (MT)

7 – busy

8 – retrieved

9 – CNAP (Calling Name Presentation) information (MT)

<calltype> - call type

1 - voice

2 - data

<number> - called number (valid only for <ccstatus>=1)

129 - national number

145 - international number

Note: the unsolicited indication is sent along with usual codes (OK, NO

CARRIER, BUSY...).

AT#ECAM? Read command reports whether the extended call monitoring function is

currently enabled or not, in the format:

#ECAM: <onoff>

AT#ECAM=? Test command returns the list of supported values for <onoff>

3.5.7.1.49. SMS Overflow - #SMOV

#SMOV - SMS Overflow

AT#SMOV=

[<mode>]

Set command enables/disables the SMS overflow signalling function.

Parameter:

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 317 318

Pas de commentaire

DCS WDU models Spécifications Page 205