DCS WDU models Spécifications télécharger pdf (Page 256)

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

3.5.7.3.4. FTP Put - #FTPPUT

#FTPPUT - FTP Put

AT#FTPPUT=

[<filename>]

Execution command, issued during an FTP connection, opens a data

connection and starts sending <filename> file to the FTP server.

If the data connection succeeds, a CONNECT indication is sent, otherwise a

NO CARRIER indication is sent.

Parameter:

<filename> - string type, name of the file.

Note: use the escape sequence +++ to close the data connection.

Note: The command causes an ERROR result code to be returned if no FTP

connection has been opened yet.

AT#FTPPUT=? Test command returns the OK result code.

3.5.7.3.5. FTP Get - #FTPGET

#FTPGET - FTP Get

AT#FTPGET=

[<filename>]

Execution command, issued during an FTP connection, opens a data

connection and starts getting a file from the FTP server.

If the data connection succeeds a CONNECT indication is sent, otherwise a

NO CARRIER indication is sent.

The file is received on the serial port.

Parameter:

<filename> - file name, string type.

Note: The command causes an ERROR result code to be returned if no FTP

connection has been opened yet.

AT#FTPGET=? Test command returns the OK result code.

3.5.7.3.6. FTP Type - #FTPTYPE

#FTPTYPE - FTP Type

AT#FTPTYPE=

[<type>]

Set command, issued during an FTP connection, sets the file transfer type.

Parameter:

<type> - file transfer type:

1 2 ... 251 252 253 254 255 256 257 258 259 260 261 ... 317 318

Pas de commentaire

DCS WDU models Spécifications Page 256