DCS RF15IR1 Manuel d'utilisateur télécharger pdf (Page 27)

To remove the drain pump:

Unplug ice maker from the electrical supply and remove the rear access cover from the

icemaker.

Unscrew the leveling leg in the back corner until the end of the threaded portion is flush

with the threaded nut insert in the base (A).

Unscrew the 4 hose clamps and remove the 3 hoses from the front of the drain pump (B).

Rotate the drain pump and remove from the ice maker (C). It may be necessary to

disconnect the ground wire connection in the back flange of the cabinet (D).

Disconnect the ice maker power cord from the drain pump (E).

To drain water from the pump refer to ‘Preparing the ice maker for storage’.

Installation of drain pump is reverse of this procedure.

DRAIN PUMP REMOVAL INSTRUCTIONS

Power cord

Hose clamps (x4) and hose tubes (x3)

Leveling leg

Ground wire connection

(back flange)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Pas de commentaire

DCS RF15IR1 Manuel d'utilisateur Page 27