Dcs CP-366 Manuel d'utilisateur télécharger pdf (Page 12)

UNPACKING AND HANDLING

■

The professional cooktop should be moved close to

its final location. Electric and gas connections should

be made (pgs. 15 & 16) and the backguard installed

(as required, pg. 8 & 15) before the cooktop is placed

in its final position. The grill and griddle sections are

fastened in place at the front with screws. They are

designed to be stationary and not meant to be

removed for cleaning. The griddle has two leveling

screws beneath the rear flue cover which can be used

to adjust the griddle to the desired slope. The center

screw is for shipping and should be removed. See Fig.

ANCHORING THE COOKTOP

■

Due to the weight of the cooktop, along with a built-

in side frame gasket that is meant to rest and create

a seal on the counter top once installed, it is not

necessary to anchor the unit to the counter.

Fig. 2

Shipping Screw

(remove)

Outer Leveling

Screws (2)

Griddle Flue Cover

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Pas de commentaire

Dcs CP-366 Manuel d'utilisateur Page 12