DCS WO-127GN Manuel d'instructions télécharger pdf (Page 205)

171

Table of

contents

Operation

MENU/Settings

Index

Warning indicators and

messages

If a code starting with a letter of the alphabet appears, the self-diagnosis function on the camera

is working. The last two digits (indicated by

ss) will differ depending on the state of the

camera.

If you cannot solve the problem even after trying the following corrective actions a few times,

the camera may need repair. Contact your Sony dealer or local authorized Sony service facility.

C:32:ss

• There is trouble with the camera’s hardware. Turn the power off and on again.

C:13:ss

• The camera cannot read or write data on the memory card. Try turning off and on the camera again, or

taking out and inserting the memory card several times.

• The internal memory has experienced a format error, or an unformatted memory card is inserted.

Format the internal memory or the memory card (page 138).

• The inserted memory card cannot be used with the camera, or the data is damaged. Insert a new

memory card.

E:61:ss

E:62:ss

E:91:ss

• A camera malfunction has occurred. Initialize the camera (page 124), then turn the power on again.

E:94:ss

• There is a malfunction when writing or deleting data. Repair is required. Contact your Sony dealer or

local authorized Sony service facility. Be prepared to give all numbers in the error code beginning

from the E.

If the following messages appear, follow the instructions.

• The battery level is low. Charge the battery pack immediately. Depending on the conditions of use or

the type of battery pack, the indicator may flash even though there are still 5 to 10 minutes of

remaining battery time left.

For use with compatible battery only

• The battery inserted is not an NP-BN1 (supplied) battery pack.

Self-diagnosis display

Messages

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 237 238

Pas de commentaire

DCS WO-127GN Manuel d'instructions Page 205